Vertex Standard VX-6000 Series
• 250 Channels and 250 Groups
• 120 Watts Low Band / 110 Watts VHF / 100 Watts UHF
• Low Band: 37 – 50 MHz
• VHF: 148 – 174 MHz
• UHF: 450 – 480 MHz
• 7 Programmable Backlit Keys
• 8-Character Alphanumeric Display
Built for Durability
The one-piece die-cast enclosure doubles as its chassis, yielding extreme strength for resistance against shock and vibration and avoids over-heating.
Loud, Full-Sounding Audio
Audio companding ensuress full-sound audio for narrow band channel applications. The VX-6000 also has 5W high-powered audio output for crisp sound that helps you hear in noisy environments. Use the optional 10W external speaker for enhanced clarity.
Multi-Configurations For Dual-Band Capability
One VX-6000 Control Head and two RF Decks on different bands may be networked for dual-band operation. Low Band, VHF or UHF radios may be combined to meet complex communications requirements for multi-agency operations.
When Safety Counts
As with all Vertex Standard mobile radios, the VX-6000 has built-in Emergency alert for enhanced driver safety. A panic button can be triggered on the front panel to alert the dispatcher when problems arise.
In addition, the VX-6000 features an internal emergency microphone on the front panel so the driver can continue to communicate with dispatch should the regular microphone become unusable.
Horn alert capability enables base station operator to issue a 2-Tone, 5-Tone or DTMF signal remotely to activate the car’s horn to go off as an additional emergency alert to draw attention to the vehicle.
Exclusive Auto-Range Transpond System (ARTS™)
Designed to inform the user when out of communication range with another ARTS™-equipped station. If out of range more than 2 minutes, the radio senses no signal and beeps to alert the user. The base station can then alert the field unit to move back into range. A great solution to keep your workers coordinated.
Additional Features
• DTMF ANI
• CTCSS / DCS Encode and Decode
• BCLO, BTLO and TOT Functions
• Status Quick Check
• Scan Options: Basic, Priority, Dual Watch
• Group Scan
• D-Sub 25 Pin Accessory Connector
• Water Shield Microphone Connector
• Public Address
• User-Selectable Tones
• Radio-to-Radio Cloning
Options
• Voice Inversion Encryption
• Rolling Code Encryption
• Voice Inversion Encryption and DTMF Paging
• 2-Tone Decode
• 5-Tone Encode/Decode
• MDC-1200® / GE-STAR® ANI Encode
ACCESSORIES
Alignment/Service Related
CT-88 cable to adjust firmware. AAC54X001 |
FIF-8 *nla* firmware writer. AAC46CX001. r/b FIF-12A |
Control Head
CNT-5000 compact motorcycle control head |
CNT-6000 Control head for multi-head configurations |
Cover Plate
RMK-4000B Cover plate for the RF Deck in Remote Applications. |
RMK-4000H Cover Rem/Mount Cont Head |
RMK-5000B dedicated Motorcycle Control Head. |
DC Cables
CT-96PS Ignition Sense Cable for the VX4000, VX-5500 and VX6000 mobiles |
E-DC-23 30 ft. DC cablefor VX-6000 mobiles |
Microphone
MD-12A8J desktop microphone=== |
MH-53A8A Heavy Duty Weatherproof Noise Canceling DTMF mic |
Mounting Bracket
MMB-77 Locking mobile mounting bracketfor the VX6000 |
MMB-79 Mobile mounting bracket for the VX6000 |
MMB-88 mounting bracket=== |
Programming and Instalation
CT-105 FIF-10 interface cable to connect: VX-530 /600 /800 /900 & VX-5500 /-6000. |
CT-70 Radio Programming Cable |
CT-72 Cloning Cable (Set-to-Set Clone)=== |
FIF-10A **R/B FIF-12A** USB Interface for PC prog. Check models for add’l cable pigtails – not incl.=== |
VX VPL-1 Programming cable from PC. Check specific models for additional cable pigtails.=== |
VX MPI Programming kit for the MDC1200 and the FVP-35 |
Signaling
VME-100 VME-100 Board for MDC1200 Digital ANI |
Speaker
MLS-100 External Speaker (12 watt peak) |
MLS-200 15W peak external weatherproof speaker |